skip to Main Content
MENUMENU
  • About Us
  • Safety
  • Resources
  • Contact Us

Impact Cable Cutters

impact cable cutters

The original portable tools invented in 1928 by Morse-Starrett to cut wire rope. Actuated by striking with a hammer, they are easy to operate and give superior performance without jamming. They are precision-engineered to deliver a clean cut without affecting the original roundness of the wire rope. The blades and dies are made of the finest tool steel available, heat-treated, and ground to close tolerances.

Model 1 (light duty)

model 1 light duty
model 1 light duty diagram
Product Description
Part Description Weight
101
Cutter complete 8 lbs.
102
Casting base 4 lbs.
103
Plunger 3 lbs.
104
Die (set) 4 oz.
105
Blade (with pin) 2 oz.
106
Blade pin only  1 oz.
107
Plunger guide pin  1 oz.
108
Guard  1 oz.
109
Warning decal

Model 1A (heavy duty)

model 1A
model 1A diagram
Product Description
Part Description Weight
121
Cutter complete 17 lbs.
122
Casting base 12 lbs.
123
Plunger 4 lbs.
124
Die (set) 7 oz.
125
Blade (with pin) 2 oz.
126
Blade pin only  1 oz.
127
Plunger guide pin  1 oz.
128
Guard  2 oz.
129
Warning decal

Model 2 (extra heavy duty)

model 2
model 2 diagram
Product Description
Part Description Weight
131
Cutter complete 28 lbs.
132
Casting base 21 lbs.
133
Plunger 7 lbs.
134
Die (set) 10 oz.
135
Blade (with pin) 5 oz.
136
Blade pin only  1 oz.
137
Plunger guide pin  1 oz.
138
Guard  3 oz.
139
Warning decal

Manual Hydraulic Cutters

W-075, P-1125, C-1750

These self-contained hydraulic cutters are precision engineered tools designed to give a clean cut with minimum effort. Just pump the handle, no outside power is required.  Able to be easily carried, these models are favorites of contractors, rigging lofts and elevator repairmen, and are recommended by wire rope manufacturers worldwide.  All three models will operate underwater with a slight modification.

hydraulic cutter 01
hydraulic cutter 02
hydraulic cutter 03
hydrualic cutter diagram
Product Description
Part Description Model W Model P Model C
1
Die set W1 P1 C1
4
Blade W4 P4 C4
5
Blade pin W5 P5 C5
6
Hinge pin w/#39 W6 P6 C6
7
Ram W7 P7 C7
8
 Ram collar  W8 P8  C8
10
 Ram retracting spring  W10 P10  C10
11
Cover plate  W11 P11  C11
15
 Ram cup leather retainer  W15 P15  C15
33
Latch  W33 P33  C33
36
Pump handle  W36 P36  C36
38
Latch pin w/#39  W38 P38  C38
43
Shear blade holder  W43 P43  C43
60
Bypass valve  n/a P60  C60
62
 Overhaul kit  W62 P62  C62

Overhaul kit includes: (items listed must be purchased in kit form only)

12 Cover plate screws (3)

13 Ram retainer screw & lockwasher

14 Ram cup leather & O-ring

16 Check valve plug

17 Check valve gasket

18 Check valve spring

19 Ball check valve

20 Packing nut

21 Ball suction valve

22 Suction valve spring

23 Suction valve gasket

24 Suction valve plug

25 Suction packing screw

26 Plunger end packing

27 Plunger

28 Plunger packing set

30 Handle hinge bolt

31 Release valve retainer

32 Release valve

34 Handle grip

35 Ram collar screws (3)

37 Bail

39 Snap rings (4)

40 Guard screws (2)

42 Guard plate

44 Cover gasket

46 Lock nut

47 Packing nut wrench

50 Air vent valve

Pacific Gulf Wire Rope, Inc.
Corporate Address: 1504 Engineers Road
Belle Chasse, LA 70037
Phone: (504) 341-0066
Website: www.pacificgulfwirerope.com


Golden Meadow
Address: 580 A.O. Rappelet Road
Golden Meadow, LA 70357
Phone: (985) 396-2364

Print Friendly, PDF & Email
Back To Top