Skip to content

BTC Latch

BTC Latch Feature

916-G LATCH KIT FOR CAMPBELL HOOK

BTC Latch

916-U UNIVERSAL LATCH KIT – FOR ALL MAJOR HOOK BRANDS

Campbell offers latches already assembled to the hook as well as kits for field installation.

  • Clapper latches are zinc-plated
  • Spring spacer adapts latch to hooks with narrow cam
  • Bolt and nut permit fast, easy installation

READ AND UNDERSTAND THESE WARNINGS AND INSTRUCTIONS BEFORE USING HOOK AND LATCH.
IMPORTANT: Instructions For Use

1. Always inspect the hook and latch before using.
2. Always make sure the spring forces the latch against the point of the hook.
3. Check the load before lifting to make sure the hook (not the latch) is supporting the load.
4. To assemble latches on hooks, follow instructions supplied with kit.

BTC Diagram
Product Description
Size Size No. 916-G Kit Universal Kit Dimensions (in) Weight/100
in. mm Cat. No. UPC No. 020418 Cat. No. UPC No. 020418 A B C D E F R lb kg
1/4
6 2-22 3990101 072727 3991401 177088 23/32 9/16 1-1/4 5/8 1/4 1/4 5/32 3.3 1
5/16
8 3-23 3990201 072734 3991402 177095 23/32 9/16 1-3/8 39/64 1/4 1/4 5/32 3.7 2
4-24 3990301 072741 3991403 177101 15/16 25/32 1-17/32 15/16 9/32 9/32 3/16 5 2
3/8
10 5-25 3990401 072758 3991404 177118 15/16 25/32 1-11/16 15/16 9/32 9/32 3/16 5.6 3
6-26 3990501 072765 15/16 25/32 1-31/32 15/16 9/32 9/32 3/16 6.2 3
7/16
11 7-27 3990601 072772 3991405 177125 15/16 25/32 1-7/8 15/16 9/32 9/32 3/16 6.5 3
8-28 3990701 072789 1-9/32 1 2-3/8 1-9/32 3/8 9/16 17/64 12 5
1/2
13 9-29 3990801 072796 3991406 177132 1-9/32 1 2-11/16 1-9/32 3/8 9/16 17/64 16.5 7
10-30 3990901 072802 1-9/32 1 2-31/32 1-9/32 3/8 9/16 17/64 18.2 8
5/8
16 11-31 3991001 072819 3991407 177149 1-9/32 1 3-7/32 1-9/32 3/8 9/16 17/64 36 16
12-32 3991101 072826 3991408 177156 2 1-17/32 3-7/16 1-5/8 9/16 23/32 3/8 52 24
34 3991409 177163 2-3/16 1-3/4 4-11/32 1-3/4 9/16 11/16 13/32 70.7 32

NOTE: Latches listed on this page cannot be used on Campbell’s current design of integrated sling and hoist hooks. Please refer to the appropriate catalog pages for these hooks for proper replacement latch kits.

Warning:

  • Failure to follow the instructions for use and these warnings may cause death or serious injury.
  • Loads may disengage from hook if proper procedures are not followed.
  • A falling load may cause serious injury or death.
  • The load must never be supported by the latch.
  • Latches must always be inspected for wear or damage before use. If worn, distorted, or damaged, discard and replace.
  • Always stand clear of loads being lifted.

Pacific Gulf Wire Rope, Inc.
Corporate Address: 1504 Engineers Road
Belle Chasse, LA 70037
Phone: (504) 341-0066
Website: www.pacificgulfwirerope.com


Golden Meadow
Address: 580 A.O. Rappelet Road
Golden Meadow, LA 70357
Phone: (985) 396-2364


Geismar
Address: 35598 Highway 30
Geismar, LA 70734
Phone: (225) 450-9012

Print Friendly, PDF & Email
Back To Top