Pacific Gulf Wire Rope Co.

TURNBUCKLES


Hook & Hook Meets the performance requirements of Federal Specifications FF-T-79lb, Type 1, Form 1 - Class 5, and ASTM F-1145, except for those provisions required of the contractor.		Hook & Eye Meets the performance requirements of Federal Specifications FF-T-79lb, Type 1, Form 1 - Class 5, and ASTM F-1145, except for those provisions required of the contractor.		Eye & Eye Meets the performance requirements of Federal Specifications FF-T-79lb, Type 1, Form 1 - Class 5, and ASTM F-1145, except for those provisions required of the contractor.		Jaw & Eye Meets the performance requirements of Federal Specifications FF-T-79lb, Type 1, Form 1 - Class 5, and ASTM F-1145, except for those provisions required of the contractor.		Jaw & Jaw Meets the performance requirements of Federal Specifications FF-T-79lb, Type 1, Form 1 - Class 5, and ASTM F-1145, except for those provisions required of the contractor.

Turnbuckle assembly combinations include: Eye and Eye, Hook and Hook, Hook and Eye, Jaw and Jaw, and Jaw and Eye.

End fittings are Quenched and Tempered, bodies heat treated by normalizing.

Quenched and Tempered end fittings and normalized bodies have enhanced impact properties for greater toughness at all temperatures.

Hot Dip galvanized.

Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties.

Modified UNJ thread on end fittings for improved fatigue properties. Body has UNC threads.

Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4" through 2 1/2", a shackle one size smaller can be reeved through eye.

Forged jaw ends are fitted with bolts and nuts on sizes 1/4" - 5/8", and pins and cotter on sizes 3/4" - 2 3/4".

TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.

Lock Nuts available for all sizes.

Typical hardness levels, Tensile Strengths and Ductility Properties are available for all sizes.

Turnbuckles can be furnished proof tested or magnaflux inspected with certificates if requested at time of order.

Products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements.

Products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.

Hook & Hook Turnbuckles

Thread Diameter & Take Up (Inches)	Working Load Limit (lbs)*	Weight Each (lbs)	Dimensions (Inches)
Thread Diameter & Take Up (Inches)	Working Load Limit (lbs)*	Weight Each (lbs)	A	D	E Closed	F	J Open	K Closed	M Open	N Closed	BB
†1/4 x 4	400	.33	.25	.44	1.67	1.27	9.79	7.38	12.20	8.20	4.07
†5/16 x 4 1/2	700	.52	.31	.50	2.00	1.50	11.58	8.58	14.08	9.58	4.58
†3/8 x 6	1000	.83	.38	.56	2.28	1.77	15.23	10.62	17.84	11.84	6.10
1/2 x 6	1500	1.88	.50	.65	3.53	2.28	17.98	13.20	20.76	14.76	6.03
1/2 x 12	1500	2.77	.50	.65	3.51	2.28	30.24	19.49	33.05	21.05	12.36
5/8 x 6	2250	3.21	.63	.90	4.24	2.81	19.50	14.50	22.50	16.50	6.03
5/8 x 12	2250	4.58	.63	.90	4.23	2.81	31.84	20.84	34.84	22.84	12.39
3/4 x 6	3000	4.20	.75	.98	5.07	3.33	21.19	15.98	24.40	18.40	6.13
3/4 x 12	3000	6.92	.75	.98	5.04	3.33	33.59	22.38	36.80	24.80	12.59
3/4 x 18	3000	8.65	.75	.98	5.07	3.33	45.59	28.38	48.80	30.80	18.53
7/8 x 12	4000	9.85	.88	1.13	5.82	3.78	34.89	23.52	38.26	26.26	12.16
1 x 12	5000	14.8	1.00	1.25	6.56	4.25	36.59	25.06	40.12	28.12	12.18
* Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. † Mechanical Galvanized

Hook & Eye Turnbuckles

hookeye hookeyediag

Thread Diameter & Take Up (Inches)	Working Load Limit (lbs)*	Weight Each (lbs)	Dimensions (Inches)
Thread Diameter & Take Up (Inches)	Working Load Limit (lbs)*	Weight Each (lbs)	A	D	E Closed	F	J Open	K Closed	M Open	N Closed	R	S	X Closed	BB
†1/4 x 4	400	.31	.25	.44	1.67	1.27	11.66	7.66	12.29	8.29	.81	.34	1.76	4.07
†5/16 x 4 1/2	700	.50	.31	.50	2.00	1.50	13.50	9.00	14.28	9.78	.95	.44	2.20	4.58
†3/8 x 6	1000	.79	.38	.56	2.28	1.76	17.09	11.09	18.04	12.04	1.13	.53	2.48	6.10
1/2 x 6	1500	1.80	.50	.65	3.53	2.28	19.57	13.57	20.79	14.79	1.41	.71	3.56	6.03
1/2 x 12	1500	2.70	.50	.65	3.51	2.28	31.86	19.86	33.08	21.08	1.41	.71	3.54	12.36
5/8 x 6	2250	2.98	.63	.90	4.24	2.81	21.11	15.11	22.61	16.61	1.80	.88	4.35	6.03
5/8 x 12	2250	4.35	.63	.90	4.23	2.81	33.45	21.45	34.95	22.95	1.80	.88	4.34	12.39
3/4 x 6	3000	4.21	.75	.98	5.07	3.33	22.61	16.61	24.45	18.45	2.09	1.00	5.12	6.13
3/4 x 12	3000	6.52	.75	.98	5.04	3.33	35.01	23.01	36.85	24.85	2.09	1.00	5.09	12.59
3/4 x 18	3000	8.24	.75	.98	5.07	3.33	47.01	29.01	48.85	30.85	2.09	1.00	5.12	18.53
7/8 x 12	4000	9.34	.88	1.13	5.82	3.78	36.11	24.11	38.23	26.23	2.38	1.25	5.79	12.16
1 x 12	5000	13.9	1.00	1.25	6.56	4.25	37.65	25.65	40.06	28.06	3.00	1.43	6.50	12.18
* Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. † Mechanical Galvanized

Eye & Eye Turnbuckles

eyes eyesdiag

Thread
Diameter &
Take Up
(Inches) Working
Load Limit
(lbs)* Weight
Each
(lbs) Dimensions (Inches)

A J
Open K
Closed M
Open N
Closed R S X
Closed BB

†1/4 x 4 500 .29 .25 11.94 7.94 12.38 8.38 .81 .34 1.76 4.07

†5/16 x 4 1/2 800 .48 .31 13.92 9.42 14.48 9.98 .95 .44 2.20 4.58

†3/8 x 6 1200 .75 .38 17.56 11.56 18.24 12.24 1.13 .53 2.48 6.10

1/2 x 6 2200 1.72 .50 19.94 13.94 20.82 14.82 1.41 .71 3.56 6.03

1/2 x 12 2200 2.63 .50 32.23 20.23 33.11 21.11 1.41 .71 3.54 12.36

5/8 x 6 3500 2.75 .63 21.72 15.72 22.72 16.72 1.80 .88 4.35 6.03

5/8 x 12 3500 4.12 .63 34.06 22.06 35.06 23.06 1.80 .88 4.34 12.39

3/4 x 6 5200 4.22 .75 23.24 17.24 24.50 18.50 2.09 1.00 5.12 6.13

3/4 x 12 5200 6.12 .75 35.64 23.64 36.90 24.90 2.09 1.00 5.09 12.59

3/4 x 18 5200 7.83 .75 47.64 29.64 48.90 30.90 2.09 1.00 5.12 18.53

7/8 x 12 7200 8.83 .88 36.70 24.70 38.20 26.20 2.38 1.25 5.79 12.16

7/8 x 18 7200 11.5 .88 49.17 31.17 50.67 32.67 2.38 1.25 5.79 18.63

1 x 6 10000 9.62 1.00 26.24 20.24 28.00 22.00 3.00 1.43 6.50 6.18

1 x 12 10000 13.0 1.00 38.24 26.24 40.00 28.00 3.00 1.43 6.50 12.18

1 x 18 10000 16.3 1.00 50.24 32.24 52.00 34.00 3.00 1.43 6.50 18.18

1 x 24 10000 20.2 1.00 62.84 38.84 64.60 40.60 3.00 1.43 6.47 24.84

1 1/4 x 12 15200 19.9 1.25 42.14 30.14 44.38 32.38 3.59 1.82 8.49 12.06

1 1/4 x 18 15200 23.8 1.25 54.14 36.14 56.38 38.38 3.59 1.82 8.49 18.06

1 1/4 x 24 15200 27.8 1.25 66.70 42.70 68.94 44.94 3.59 1.82 8.49 24.62

1 1/2 x 12 21400 28.7 1.50 44.24 32.24 46.74 34.74 4.09 2.12 9.46 12.32

1 1/2 x 18 21400 34.1 1.50 56.24 38.24 58.74 40.74 4.09 2.12 9.46 18.32

1 1/2 x 24 21400 39.6 1.50 68.86 44.86 71.36 47.36 4.09 2.12 9.46 24.94

1 3/4 x 18 28000 50.7 1.75 57.38 39.38 60.38 42.38 4.65 2.38 9.97 18.37

1 3/4 x 24 28000 58.2 1.75 69.38 45.38 72.38 48.38 4.65 2.38 9.97 24.37

2 x 24 37000 83.5 2.00 75.68 51.68 79.18 55.18 5.81 2.69 13.03 24.48

2 1/2 x 24 60000 149 2.50 79.18 55.18 83.18 59.18 6.49 3.12 13.76 24.60

2 3/4 x 24 75000 174 2.75 81.34 57.34 85.84 61.84 7.00 3.25 15.09 24.65

* Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
† Mechanical Galvanized

Jaw & Eye Turnbuckles

jaweye jaweyediag

Thread
Diameter &
Take Up
(Inches) Working
Load Limit
(lbs)* Weight
Each
(lbs) Dimensions (Inches)

A B E
Closed G J
Open K
Closed M
Open N
Closed R S X
Closed BB

†1/4 x 4 500 .33 .25 .45 1.66 .64 11.57 7.57 12.28 8.28 .81 .34 1.76 4.07

†5/16 x 4 1/2 800 .52 .31 .50 2.02 .87 13.50 9.00 14.30 9.80 .95 .44 2.20 4.58

†3/8 x 6 1200 .80 .38 .53 2.11 .85 16.91 10.91 17.87 11.87 1.13 .53 2.48 6.10

1/2 x 6 2200 1.77 .50 .64 3.22 1.07 19.30 13.30 20.48 14.48 1.41 .71 3.56 6.03

1/2 x 9 2200 2.25 .50 .64 3.20 1.07 25.59 16.59 26.77 17.77 1.41 .71 3.54 9.36

1/2 x 12 2200 2.67 .50 .64 3.20 1.07 31.59 19.59 32.77 20.77 1.41 .71 3.54 12.36

5/8 x 6 3500 2.98 .63 .79 3.90 1.32 20.73 14.73 22.27 16.27 1.80 .88 4.35 6.03

5/8 x 9 3500 3.72 .63 .79 3.89 1.32 27.07 18.07 28.61 19.61 1.80 .88 4.34 9.39

5/8 x 12 3500 4.35 .63 .79 3.89 1.32 33.07 21.07 34.61 22.61 1.80 .88 4.34 12.39

3/4 x 6 5200 4.51 .75 .97 4.71 1.52 22.17 16.17 24.09 18.09 2.09 1.00 5.12 6.13

3/4 x 9 5200 5.56 .75 .97 4.68 1.52 28.57 19.57 30.49 21.49 2.09 1.00 5.09 9.59

3/4 x 12 5200 6.42 .75 .97 4.68 1.52 34.57 22.57 36.49 24.49 2.09 1.00 5.09 12.59

3/4 x 18 5200 8.14 .75 .97 4.71 1.52 46.57 28.57 48.49 30.49 2.09 1.00 5.12 18.53

7/8 x 12 7200 9.10 .88 1.16 5.50 1.77 35.68 23.68 37.91 25.91 2.38 1.25 5.79 12.16

7/8 x 18 7200 11.6 .88 1.16 5.50 1.77 48.15 30.15 50.38 32.38 2.38 1.25 5.79 18.63

1 x 6 10000 10.0 1.00 1.34 6.09 2.05 25.03 19.03 27.59 21.59 3.00 1.43 6.50 6.18

1 x 12 10000 13.4 1.00 1.34 6.09 2.05 37.03 25.03 39.59 27.59 3.00 1.43 6.50 12.18

1 x 18 10000 16.7 1.00 1.34 6.09 2.05 49.03 31.03 51.59 33.59 3.00 1.43 6.50 18.18

1 x 24 10000 20.6 1.00 1.34 6.06 2.05 61.63 37.63 64.19 40.19 3.00 1.43 6.47 24.84

1 1/4 x 12 15200 20.9 1.25 1.84 8.09 2.82 40.76 28.76 43.98 31.98 3.59 1.82 8.49 12.06

1 1/4 x 18 15200 24.8 1.25 1.84 8.09 2.82 52.76 34.76 55.98 37.98 3.59 1.82 8.49 18.06

1 1/4 x 24 15200 28.8 1.25 1.84 8.09 2.82 65.32 41.32 68.54 44.54 3.59 1.82 8.49 24.62

1 1/2 x 12 21400 30.6 1.50 2.06 8.93 2.81 42.50 30.50 46.21 34.21 4.09 2.12 9.46 12.32

1 1/2 x 18 21400 36.0 1.50 2.06 8.93 2.81 54.50 36.50 58.21 40.21 4.09 2.12 9.46 18.32

1 1/2 x 24 21400 41.5 1.50 2.06 8.93 2.81 67.12 43.12 70.83 46.83 4.09 2.12 9.46 24.94

1 3/4 x 18 28000 52.1 1.75 2.60 9.36 3.35 55.37 37.37 59.77 41.77 4.65 2.38 9.97 18.37

1 3/4 x 24 28000 59.7 1.75 2.60 9.36 3.35 67.37 43.34 71.77 47.77 4.65 2.38 9.97 24.37

2 x 24 37000 89.9 2.00 2.62 11.80 3.74 72.66 48.66 77.95 53.95 5.81 2.69 13.03 24.48

2 1/2 x 24 60000 158 2.50 3.06 13.26 4.44 76.08 52.08 82.68 58.68 6.49 3.12 13.76 24.60

2 3/4 x 24 75000 187 2.75 3.69 14.92 4.19 78.05 54.05 85.67 61.67 7.00 3.25 15.09 24.65

* Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
† Mechanical Galvanized

Jaw & Jaw Turnbuckles

jaws jawdiag

Thread
Diameter &
Take Up
(Inches) Working
Load Limit
(lbs)* Weight
Each
(lbs) Dimensions (Inches)

A B E
Closed G J
Open K
Closed M
Open N
Closed BB

†1/4 x 4 500 .37 .25 .45 1.66 .64 11.19 7.19 12.18 8.18 4.07

†5/16 x 4 1/2 800 .56 .31 .50 2.02 .87 13.07 8.57 14.12 9.62 4.58

†3/8 x 6 1200 .85 .38 .53 2.11 .85 16.25 10.25 17.50 11.50 6.10

1/2 x 6 2200 1.82 .50 .64 3.22 1.07 18.65 12.65 20.14 14.14 6.03

1/2 x 9 2200 2.29 .50 .64 3.20 1.07 24.94 15.94 26.43 17.43 9.36

1/2 x 12 2200 2.71 .50 .64 3.20 1.07 30.94 18.94 32.43 20.43 12.36

5/8 x 6 3500 3.21 .63 .79 3.90 1.32 19.74 13.74 21.82 15.82 6.03

5/8 x 9 3500 3.95 .63 .79 3.89 1.32 26.08 17.08 28.16 19.16 9.39

5/8 x 12 3500 4.58 .63 .79 3.89 1.32 32.08 20.08 34.16 22.16 12.39

3/4 x 6 5200 4.80 .75 .97 4.71 1.52 21.09 15.09 23.68 17.68 6.13

3/4 x 9 5200 5.85 .75 .97 4.68 1.52 27.49 18.49 30.08 21.08 9.59

3/4 x 12 5200 6.72 .75 .97 4.68 1.52 33.49 21.49 36.08 24.08 12.59

3/4 x 18 5200 8.45 .75 .97 4.71 1.52 45.49 27.49 48.08 30.08 18.53

7/8 x 12 7200 9.37 .88 1.16 5.50 1.77 34.65 22.65 37.62 25.62 12.16

7/8 x 18 7200 11.8 .88 1.16 5.50 1.77 4712 29.12 50.09 32.09 18.63

1 x 6 10000 10.4 1.00 1.34 6.09 2.05 23.82 17.82 27.18 21.18 6.18

1 x 12 10000 13.8 1.00 1.34 6.09 2.05 35.82 23.82 39.18 27.18 12.18

1 x 18 10000 17.1 1.00 1.34 6.09 2.05 47.82 29.82 51.18 33.18 18.18

1 x 24 10000 21.0 1.00 1.34 6.06 2.05 60.42 36.42 63.78 39.78 24.84

1 1/4 x 12 15200 21.9 1.25 1.84 8.09 2.82 39.37 27.37 43.58 31.58 12.06

1 1/4 x 18 15200 25.9 1.25 1.84 8.09 2.82 51.37 33.37 55.58 37.58 18.06

1 1/4 x 24 15200 29.8 1.25 1.84 8.09 2.82 63.93 39.93 68.14 44.14 24.62

1 1/2 x 12 21400 32.6 1.50 2.06 8.93 2.81 40.76 28.76 45.68 33.68 12.32

1 1/2 x 18 21400 38.0 1.50 2.06 8.93 2.81 52.76 34.76 57.68 39.68 18.32

1 1/2 x 24 21400 43.5 1.50 2.06 8.93 2.81 65.38 41.38 70.30 46.30 24.94

1 3/4 x 18 28000 53.5 1.75 2.60 9.36 3.35 53.35 35.35 59.16 41.16 18.37

1 3/4 x 24 28000 61.1 1.75 2.60 9.36 3.35 65.35 41.35 71.16 47.16 24.37

2 x 24 37000 96.3 2.00 2.62 11.80 3.74 69.64 45.64 76.72 52.72 24.48

2 1/2 x 24 60000 167 2.50 3.06 13.26 4.44 72.97 48.97 82.18 58.18 24.60

2 3/4 x 24 75000 199 2.75 3.69 14.92 4.19 74.75 50.75 85.50 61.50 24.65

* Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
† Mechanical Galvanized

Hook End Fittings

Shank
Diameter &
Take Up
(Inches) Working
Load Limit
(lbs) Weight
Each
(lbs) Dimensions (Inches)

A B C D F G H I L

*1/4 x 4 400 .09 .25 .25 .41 .44 1.27 .50 2.59 3.44 4.10

*5/16 x 4 1/2 700 .15 .31 .31 .50 .50 1.50 .56 3.00 4.01 4.79

*3/8 x 6 1000 .27 .38 .38 .61 .56 1.76 .62 3.88 5.00 5.92

1/2 x 6 1500 .59 .50 .50 .78 .65 2.28 .82 4.19 6.19 7.38

1/2 x 12 1500 .75 .50 .50 .78 .65 2.28 .82 7.19 9.19 10.38

5/8 x 6 2250 1.05 .63 .63 1.00 .90 2.81 1.00 4.44 6.75 8.25

5/8 x 12 2250 1.31 .63 .63 1.00 .84 2.81 1.00 7.44 9.75 11.25

3/4 x 6 3000 1.35 .75 .75 1.21 .98 3.33 1.13 4.56 7.43 9.20

3/4 x 12 3000 2.13 .75 .75 1.21 .98 3.33 1.13 7.56 10.43 12.20

3/4 x 18 3000 2.51 .75 .75 1.21 .98 3.33 1.13 10.56 13.43 15.20

7/8 x 12 4000 3.12 .88 .88 1.37 1.13 3.78 1.26 7.81 11.13 13.13

7/8 X 18 4000 3.62 .88 .88 1.37 1.13 3.78 1.26 10.81 14.13 16.13

1 X 6 5000 3.96 1.00 1.00 1.53 1.25 4.25 1.38 5.06 8.84 11.06

1 x 12 5000 4.72 1.00 1.00 1.53 1.25 4.25 1.38 8.06 11.84 14.06

* Mechanical Galvanized

Eye End Fittings

eyeend

Shank
Diameter &
Take Up
(Inches) Working
Load Limit
(lbs) Weight
Each
(lbs) Dimensions (Inches)

A H R S U V W

*1/4 x 4 500 .07 .25 2.59 .81 .34 .22 .78 4.19

*5/16 x 4 1/2 800 .13 .31 3.00 .95 .44 .28 1.00 4.99

*3/8 x 6 1200 .23 .38 3.88 1.13 .53 .34 1.21 6.12

1/2 x 6 2200 .51 .50 4.19 1.41 .71 .44 1.59 7.41

1/2 x 9 2200 .59 .50 5.69 1.41 .71 .44 1.59 8.91

1/2 x 12 2200 .68 .50 7.19 1.41 .71 .44 1.59 10.41

5/8 x 6 3500 .82 .63 4.44 1.80 .88 .50 1.88 8.36

5/8 x 9 3500 .95 .63 5.94 1.80 .88 .50 1.88 9.86

5/8 x 12 3500 1.08 .63 7.44 1.80 .88 .50 1.88 11.36

3/4 x 6 5200 1.36 .75 4.56 2.09 1.00 .63 2.26 9.25

3/4 x 9 5200 1.55 .75 6.06 2.09 1.00 .63 2.26 10.75

3/4 x 12 5200 1.73 .75 7.56 2.09 1.00 .63 2.26 12.25

3/4 x 18 5200 2.10 .75 10.56 2.09 1.00 .63 2.26 15.25

7/8 x 12 7200 2.61 .88 7.81 2.38 1.25 .75 2.75 13.10

7/8 x 18 7200 3.12 .88 10.81 2.38 1.25 .75 2.75 16.10

1 x 6 10000 3.15 1.00 5.06 3.00 1.43 .88 3.19 11.00

1 x 12 10000 3.81 1.00 8.06 3.00 1.43 .88 3.19 14.00

1 x 18 10000 4.48 1.00 11.06 3.00 1.43 .88 3.19 17.00

1 x 24 10000 5.15 1.00 14.06 3.00 1.43 .88 3.19 20.00

1 1/4 x 12 15200 7.07 1.25 8.38 3.59 1.82 1.12 4.06 16.19

1 1/4 x 18 15200 8.12 1.25 11.38 3.59 1.82 1.12 4.06 19.19

1 1/4 x 24 15200 9.16 1.25 14.38 3.59 1.82 1.12 4.06 22.19

1 1/2 x 12 21400 10.3 1.50 8.75 4.09 2.12 1.25 4.62 17.37

1 1/2 x 18 21400 11.8 1.50 11.75 4.09 2.12 1.25 4.62 20.37

1 1/2 x 24 21400 13.3 1.50 14.75 4.09 2.12 1.25 4.62 23.37

1 3/4 x 18 28000 17.5 1.75 12.16 4.65 2.38 1.50 5.38 21.19

1 3/4 x 24 28000 19.5 1.75 15.16 4.65 2.38 1.50 5.38 24.19

2 x 24 37000 28.9 2.00 15.59 5.81 2.69 1.75 6.19 27.59

2 1/2 x 24 60000 46.4 2.50 17.56 6.50 3.12 2.00 7.12 29.59

2 3/4 x 24 75000 60.2 2.75 17.69 7.00 3.25 2.25 7.75 30.92

* Mechanical Galvanized

Jaw End Fittings

jawend

Shank
Diameter &
Take Up
(Inches) Working
Load Limit
(lbs) Weight
Each
(lbs) Dimensions (Inches)

A B C D F H I
Nom. Min. L
Nom. Min. Y MM OO
Bolt Pin

*1/4 x 4 500 .11 .25 .45 .91 .30 .63 2.59 3.72 4.09 1.13 1.41 .25

*5/16 x 4 1/2 800 .17 .31 .50 1.02 .30 .69 3.00 4.41 4.81 1.39 1.41 .25

*3/8 x 6 1200 .28 .38 .53 1.15 .36 .81 3.88 5.28 5.75 1.47 1.58 .31

1/2 x 6 2200 .56 .50 .64 1.36 .42 1.00 4.19 6.51 7.07 1.81 1.87 .37

1/2 x 9 2200 .63 .50 .64 1.36 .42 1.00 5.69 8.01 8.57 1.81 1.87 .37

1/2 x 12 2200 .72 .50 .64 1.36 .42 1.00 7.19 9.51 10.07 1.81 1.87 .37

5/8 x 6 3500 1.05 .63 .79 1.75 .55 1.31 4.31 7.12 7.91 2.36 2.44 .50

5/8 x 9 3500 1.18 .63 .79 1.75 .55 1.31 5.81 8.62 9.41 2.36 2.44 .50

5/8 x 12 3500 1.31 .63 .79 1.75 .55 1.31 7.31 10.12 10.91 2.36 2.44 .50

3/4 x 6 5200 1.65 .75 .97 2.09 .69 1.63 4.56 7.86 8.84 2.81 2.56 .63

3/4 x 9 5200 1.84 .75 .97 2.09 .69 1.63 6.06 9.36 10.34 2.81 2.56 .63

3/4 x 12 5200 2.03 .75 .97 2.09 .69 1.63 7.56 10.86 11.84 2.81 2.56 .63

3/4 x 18 5200 2.41 .75 .97 2.09 .69 1.63 10.56 13.86 14.84 2.81 2.56 .63

7/8 x 12 7200 2.88 .88 1.16 2.56 .81 1.88 7.81 11.70 12.81 3.25 3.09 .75

7/8 x 18 7200 3.25 .88 1.16 2.56 .81 1.88 10.81 14.70 15.81 3.25 3.09 .75

1 x 6 10000 3.56 1.00 1.34 2.76 .94 2.12 5.06 9.35 10.59 3.73 3.44 .88

1 x 12 10000 4.22 1.00 1.34 2.76 .94 2.12 8.06 12.35 13.59 3.73 3.44 .88

1 x 18 10000 4.89 1.00 1.34 2.76 .94 2.12 11.06 15.35 16.59 3.73 3.44 .88

1 x 24 10000 5.56 1.00 1.34 2.76 .94 2.12 14.06 18.35 19.59 3.73 3.44 .88

1 1/4 x 12 15200 8.10 1.25 1.84 3.72 1.19 2.63 8.38 14.25 15.79 4.92 4.53 1.13

1 1/4 x 18 15200 9.14 1.25 1.84 3.72 1.19 2.63 11.38 17.25 18.79 4.92 4.53 1.13

1 1/4 x 24 15200 10.2 1.25 1.84 3.72 1.19 2.63 14.38 20.25 21.79 4.92 4.53 1.13

1 1/2 x 12 21400 12.3 1.50 2.06 4.16 1.47 3.12 8.75 15.07 16.84 5.27 5.13 1.38

1 1/2 x 18 21400 13.8 1.50 2.06 4.16 1.47 3.12 11.75 18.07 19.84 5.27 5.13 1.38

1 1/2 x 24 21400 15.3 1.50 2.06 4.16 1.47 3.12 14.75 21.07 22.84 5.27 5.13 1.38

1 3/4 x 18 28000 18.9 1.75 2.60 4.66 1.72 3.50 12.16 18.49 20.58 6.25 6.00 1.63

1 3/4 x 24 28000 21.0 1.75 2.60 4.66 1.72 3.50 15.16 21.49 23.58 6.25 6.00 1.63

2 x 24 37000 35.3 2.00 2.62 5.61 2.09 4.19 15.59 23.82 26.36 7.28 6.88 2.00

2 1/2 x 24 60000 55.8 2.50 3.06 5.84 2.38 5.62 17.20 25.61 29.09 9.04 7.50 2.25

2 3/4 x 24 75000 72.4 2.75 3.69 6.57 2.88 6.12 17.35 26.75 30.75 9.50 8.38 2.75

* Mechanical Galvanized

Body Only

Shank
Diameter &
Take Up
(Inches) Working
Load Limit
(lbs) Weight
Each
(lbs) Dimensions (Inches)

AA BB CC DD EE GG HH JJ

*1/4 x 4 500 .15 4.87 4.07 .40 .72 .34 .50 .38 .17

*5/16 x 4 1/2 800 .22 5.59 4.58 .51 .82 .38 .56 .44 .19

*3/8 x 6 1200 .29 7.29 6.10 .60 .88 .38 .63 .50 .19

1/2 x 6 2200 .70 7.70 6.03 .84 1.19 .68 .81 .63 .28

†1/2 x 9 2200 1.03 11.03 9.36 .84 1.19 .68 .81 .63 .28

†1/2 x 12 2200 1.27 14.03 12.36 .84 1.19 .68 .81 .63 .28

5/8 x 6 3500 1.11 8.02 6.03 1.00 1.43 .83 1.00 .75 .34

†5/8 x 9 3500 1.59 11.38 9.39 1.00 1.43 .83 1.00 .75 .34

†5/8 x 12 3500 1.96 14.38 12.39 1.00 1.43 .83 1.00 .75 .34

3/4 x 6 5200 1.50 8.26 6.13 1.07 1.74 .94 1.13 .94 .40

†3/4 x 9 5200 2.17 11.72 9.59 1.07 1.74 .94 1.13 .94 .40

†3/4 x 12 5200 2.66 14.72 12.59 1.07 1.74 .94 1.13 .94 .40

†3/4 x 18 5200 3.63 20.66 18.53 1.07 1.74 .94 1.13 .94 .40

7/8 x 12 7200 3.61 14.62 12.16 1.23 2.00 1.13 1.31 1.06 .47

†7/8 x 18 7200 5.27 21.09 18.63 1.23 2.00 1.13 1.31 1.06 .47

1 x 6 10000 3.32 9.00 6.18 1.41 2.45 1.25 1.50 1.25 .60

1 x 12 10000 5.34 15.00 12.18 1.41 2.45 1.25 1.50 1.25 .60

1 x 18 10000 7.35 21.00 18.18 1.41 2.45 1.25 1.50 1.25 .60

†1 x 24 10000 9.85 27.66 24.84 1.41 2.45 1.25 1.50 1.25 .60

1 1/4 x 12 15200 5.72 15.40 12.06 1.67 2.62 1.25 1.88 1.50 .56

1 1/4 x 18 15200 7.58 21.40 18.06 1.67 2.62 1.25 1.88 1.50 .56

†1 1/4 x 24 15200 9.45 27.96 24.62 1.67 2.62 1.25 1.88 1.50 .56

1 1/2 x 12 21400 8.01 15.82 12.32 1.75 2.99 1.50 2.25 1.75 .62

1 1/2 x 18 21400 10.4 21.82 18.32 1.75 2.99 1.50 2.25 1.75 .62

†1 1/2 x 24 21400 12.9 28.45 24.94 1.75 2.99 1.50 2.25 1.75 .62

1 3/4 x 18 28000 15.7 22.44 18.37 2.04 3.62 1.75 2.62 2.12 .75

1 3/4 x 24 28000 19.2 28.44 24.37 2.04 3.62 1.75 2.62 2.12 .75

2 x 24 37000 25.8 29.13 24.48 2.33 4.14
2.00
3.00 2.38 .88

2 1/2 x 24 60000 55.9 31.66 24.60 3.53 5.62 2.75 3.88 3.12 1.25

2 3/4 x 24 75000 54.0 31.66 24.65 3.51 5.62 2.75 3.88 4.48 1.25

* Mechanical Galvanized
† Contains Center Rib for additional body support.

Shank Diameter & Take Up (Inches)	Working Load Limit (lbs)	Weight Each (lbs)	Dimensions (Inches)
Shank Diameter & Take Up (Inches)	Working Load Limit (lbs)	Weight Each (lbs)	A	B	C	D	F	G	H	I	L
*1/4 x 4	400	.09	.25	.25	.41	.44	1.27	.50	2.59	3.44	4.10
*5/16 x 4 1/2	700	.15	.31	.31	.50	.50	1.50	.56	3.00	4.01	4.79
*3/8 x 6	1000	.27	.38	.38	.61	.56	1.76	.62	3.88	5.00	5.92
1/2 x 6	1500	.59	.50	.50	.78	.65	2.28	.82	4.19	6.19	7.38
1/2 x 12	1500	.75	.50	.50	.78	.65	2.28	.82	7.19	9.19	10.38
5/8 x 6	2250	1.05	.63	.63	1.00	.90	2.81	1.00	4.44	6.75	8.25
5/8 x 12	2250	1.31	.63	.63	1.00	.84	2.81	1.00	7.44	9.75	11.25
3/4 x 6	3000	1.35	.75	.75	1.21	.98	3.33	1.13	4.56	7.43	9.20
3/4 x 12	3000	2.13	.75	.75	1.21	.98	3.33	1.13	7.56	10.43	12.20
3/4 x 18	3000	2.51	.75	.75	1.21	.98	3.33	1.13	10.56	13.43	15.20
7/8 x 12	4000	3.12	.88	.88	1.37	1.13	3.78	1.26	7.81	11.13	13.13
7/8 X 18	4000	3.62	.88	.88	1.37	1.13	3.78	1.26	10.81	14.13	16.13
1 X 6	5000	3.96	1.00	1.00	1.53	1.25	4.25	1.38	5.06	8.84	11.06
1 x 12	5000	4.72	1.00	1.00	1.53	1.25	4.25	1.38	8.06	11.84	14.06
* Mechanical Galvanized