SWAGE SOCKETS

 

WIRE ROPE ASSEMBLIES

When ordering wire rope with end attachments - as shown here - lengths should be specified. Additionally, the load at which this measurement is taken should be specified, i.e., at no load, at a percentage of minimum breaking force, etc.

The diagrams to the left do not show all possible combinations of fittings; but the same measuring methods should be followed.
Single Rope Legs and Open Swaged Sockets Single Rope Legs and Open and Closed Swaged Sockets Single Rope Legs and Closed Swage Sockets

 

Diameter
of Rope
(Inches)		 Minimum
Length (SL)
of pendant
ft-inches		 Single
Part
Vertical		 Two Pendants
When Used		 Open Swaged Socket Closed Swaged Socket
30° 45° O
Inches		 D
Inches		 E
Inches		 Weight
LB		 K
Inches		 W
Inches		 Weight
LB
1/4 0-11 0.59 1.0 0.83 11/16 11/16 1 5/32 .52 1/2 3/4 .32
3/8 1-3 1.3 2.3 1.8 13/16 13/16 1 11/32 1.07 43/64 7/8 .72
1/2 1-8 2.3 4.0 3.2 1 1 1 1/2 2.08 55/64 1 1/16 1.35
5/8 2-0 3.6 6.2 5.1 1 1/4 1 3/16 1 21/32 4.28 1 1/8 1 1/4 2.85
3/4 2-5 5.1 8.9 7.2 1 1/2 1 3/8 2 1/16 7.97 1 5/16 1 7/16 4.90
7/8 2-10 6.9 12 9.8 1 3/4 1 5/8 2 7/16 11.3 1 1/2 1 11/16 7.28
1 3-2 9.0 15 13 2 2 2 3/4 17.8 1 3/4 2 1/16 10.3
1 1/8 3-7 11 19 16 2 1/4 2 1/4 3 1/8 26.0 2 2 5/16 14.4
1 1/4 4-0 14 24 20 2 1/2 2 1/2 3 1/2 34.9 2 1/4 2 9/16 21.4
1 3/8 4-5 17 29 23 2 1/2 2 1/2 4 44.4 2 1/4 2 9/16 27.9
1 1/2 4-9 20 34 28 3 2 3/4 4 3/8 58.0 2 1/2 2 13/16 36.0
1 3/4 5-5 27 46 38 3 1/2 3 1/2 5 87.5 3 3 9/16 51.0
2 6-4 34 60 49 4 3 3/4 6 1/8 150 3 1/4 3 13/16 90.0

 

 

 

Open Swage Sockets 

Rope
Diameter
Inches		 Dimensions In Inches Approx.
Wt./Lbs.		 A/S
A B D E F L M O Y
1/4
5/16
3/8
7/16		 .495
.770
.770
.982		 .272
.339
.406
.484		 .688
.812
.812
1.00		 1 1/2
1 3/4
1 3/4
2		 4 3/4
6 1/4
6 1/4
7 13/16		 4
5 5/16
5 5/16
6 11/16		 5/16
13/32
13/32
1/2		 11/16
13/16
13/16
1		 1 3/8
1 5/8
1 5/8
2		 .57
1.24
1.20
2.45		 .438
.688
.688
.875
1/2
9/16
5/8
3/4		 .982
1.257
1.257
1.545		 .547
.609
.672
.796		 1.00
1.19
1.19
1.38>		 2
2 1/4
2 -1/4
2 3/4		 7 13/16
9 9/16
9 9/16
11 11/16		 6 11/16
8 1/8
8 1/8
10		 1/2
5/8
5/8
3/4		 1
1 1/4
1 1/4
1 1/2		 2
2 1/2
2 1/2
3		 2.40
4.80
4.50
7.80		 .875
1.125
1.125
1.375
7/8
1 0/0
1 1/8
1 1/4		 1.700
1.975
2.245
2.525		 .938
1.062
1.188
1.328		 1.63
2.00
2.25
2.50		 3 1/4
3 3/4
4 1/4
4 3/4		 13 5/8
15 5/8
17 1/2
19 7/16		 11 5/8
13 3/8
15
16 1/2		 15/16
1 1/32
1 3/16
1 3/16		 1 3/4
2
2 1/4
2 1/2		 3 3/8
4
4 1/2
5		 11.80
17.80
28.90
36.20		 1.50
1.75
2.00
2.25
1 3/8
1 1/2
1 3/4
2 0/0		 2.800
3.075
3.385
3.935		 1.453
1.578
1.859
2.109		 2.50
2.75
3.50
3.75		 5 1/4
5 3/4
6 3/4
8		 21 1/4
23 1/4
27 1/8
31 7/16		 18 1/8
19 3/4
23
26 3/4		 1 5/16
1 7/16
1 11/16
1 13/16		 2 1/2
3
3 1/2
4		 5 1/4
5 3/4
7
8		 47.70
64.40
93.40
148.00		 2.50
2.75
3.00
3.50
2 1/4
2 1/2
3 0/0		 4.450
4.930
5.930		 2.360
2.657
3.166		 4 1/4
4 1/4
5.25		 6 3/4
6 3/4
8 5/8		 32 7/8
34 5/8
41 1/8		 27 3/4
29 1/2
35 5/8		 2 9/16
2 9/16
3		 4 1/2
4 1/2
5 3/4		 8 3/4
8 3/4
9 1/2		 173.00
233.00
382.00		 3.96
4.36
5.25
  • Forged from special bar quality carbon steel, suitable for cold forming.
  • Hardness controlled by spheroidized annealing.
  • Swage sockets are recommended for us on 6x19 or 6x37 IWRC regular lay ropes. They are also satisfactory on galvanized bridge rope. They are not recommended for us on fiber cor or lang lay ropes.
  • Sockets properly applied have an efficiency rating of 100%. This rating is based on the catalog strength of wire rope.
    •  

     

     

     

     

     

    Closed Swage Sockets

    Rope
    Diameter
    Inches    		 Dimensions In Inches Approx.
    Wt./Lbs    		 A/S
    A C D L
    1/4
    5/16
    3/8
    7/16    		 .495
    .770
    .770
    .982    		 1 7/16
    1 11/16
    1 11/16
    2    		 .750
    .875
    .875
    1.063    		 3 1/2
    4 1/2
    4 1/2
    5 3/4    		 .35
    .77
    .73
    1.47    		 .438
    .688
    .688
    .875
    1/2
    9/16
    5/8
    3/4    		 .982
    1.257
    1.257
    1.545    		 2
    2 1/2
    2 1/2
    3    		 1.063
    1.250
    1.250
    1.438    		 5 3/4
    7 1/4
    7 1/4
    8 5/8    		 1.38
    2.90
    2.80
    5.16    		 .875
    1.125
    1.125
    1.375
    7/8
    1 0/0
    1 1/8
    1 1/4    		 1.700
    1.975
    2.245
    2.525    		 3 1/2
    4
    4 1/2
    5    		 1.688
    2.063
    2.313
    2.563    		 10 1/8
    11 1/2
    12 3/4
    14 3/8    		 7.40
    11.20
    16.00
    22.70    		 1.50
    1.75
    2.00
    2.25
    1 3/8
    1 1/2
    1 3/4
    2 0/0    		 2.800
    3.075
    3.385
    3.935    		 5 1/4
    5 1/2
    6 3/4
    7 3/4    		 2.563
    2.813
    3.563
    3.813    		 15 3/4
    17
    20
    23    		 29.00
    37.50
    55.70
    90.00    		 2.50
    2.75
    3.00
    3.50
    2 1/4
    2 1/2
    3 0/0    		 4.450
    4.930
    5.930    		 8 5/8
    8 5/8
    9 1/4    		 4.312
    4.312
    5-5/16    		 24 7/8
    26 1/4
    32 1/8    		 125.00
    142.00
    252.00    		 3.96
    4.36
    5.25
  • Forged from special C-1035 steel, fine grain, special bar quality.
  • Spheroidized annealed for cold swaging.
  • Swage sockets are recommended for us on 6x19 or 6x37 IWRC regular lay wire ropes. They are not recommended for us on fiber core lang lay wire ropes.
  • Sockets properly applied have an efficiency rating of 100%. This is based on the catalog strength of the wire rope.
    		•

     

     

     

     
    © Pacific Gulf Wire Rope, Inc. 2010
    Home | Products | Services | Certificate Access | Contact Us | Safety | Affiliates