PLATE CLAMPS IP 10

 

 

 The IP10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheets, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed. Usually used as a single point pick or when used with a spreader beam with multiple vertical drop lines.

  • Available in capacities of .5 through 30 metric tons (Higher Working Load Limits are available upon request).
  • Wide variety of jaw openings available: 0" to 6.10"
  • Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
  • Individually Proof Tested to 2 times the Working Load Limit with certification.
  • Full 180° turning range for material transfer, turning or moving.
  • Lock open, lock closed ability with latch for pretension on material and then release of material.
    •  

     

    Working Load Limit
    (Tons)    		 Weight Each
    (Lbs.)    		 Jaw Size

    0.5

    		 3.97

    0 - .63

    1

    		 4.85

    0 - .75

    2

    		 16.8

    0 - 1.38

    3

    		 30.4

    0 - 1.56

    4.5

    		 33.1

    0 - 1.56

    6

    		 51.9

    0 - 2.00

    6

    		 62.9

    2.00 - 4.00

    9

    		 60.7

    0 - 2.00

    9

    		 62.9

    2.00 - 4.00

    12

    		 108

    0 - 2.13

    12

    		 128

    2.13 - 4.25

    16

    		 150

    .25 - 2.50

    16

    		 199

    2.50 - 5.00

    22.5

    		 238

    .25 - 3.13

    22.5

    		 243

    3.13 - 6.10

    30

    		 327

    .25 - 3.13
    30 335 3.13 - 6.10
    Stainless Steel with Fixed Hoisting Eye
    0.5 3.97 0 - .63
    1 4.41 0 - .75
    2 15.0 0 - 1.38
    3 30.5 0 - 1.56
    4.5 33.1 0 - 1.56
    6 51.9 0 - 2.00
    9 60.7 0 - 2.00
    12 108 0 - 2.13
    Very Hard Materials with Fixed Hoisting Eye
    0.5 3.97 0 - .63
    1 15.0 0 - 1.38
    2 30.4 0 - 1.56
    3 33.1 0 - 1.56
    4.5 51.9 0 - 2.00
    6 60.7 0 - 2.00

     

     


    © Pacific-Gulf Wire Rope, 2010
    Home | Products | Services | Certificate Access | Contact Us | Affiliates