CAMPBELL GX PLATE CLAMPS
MADE IN USA

 

  GX Plate Clamps - Product Features:

  • Drop-forged and heat treated components
  • Can be used for both vertical and horizontal-to-vertical through 180°
  • Exclusive feature is a patented wear indicator system
  • When convex teeth are flattened between unique wear indicator grooves, it is time to change the cam
  • Note: The Pad and Cam should be replaced at the same time
  • Clamps 100% Proof Tested, a Certificate of Test supplied with each clamp
  • Fewer stress points and less chance of side loading damage
  • Order unit is "Each"
    •  
    WARNING!
    • Select proper size clamp for the job.
    • Determine the weight of the plate to be lifted.
    • Do not exceed WLL (Working Load Limit) shown on clamp.
    • Plate thickness must be within grip range shown on clamp.
    GX Plate Clamps - Product Details
    Working Load Limit Grip Range Weight Each
    1 Ton 1/16 - 3/4 Inch 8 Lbs.
    3 Tons 1/16 - 1 Inch 17 Lbs.

     

     



     

     

      GX Structural Short Leg Plate Clamps - Product Features:

  • Designed for a secure bite on small or odd shaped, wide flanged beams
  • Put short leg under plate when lifting from horizontal to vertical
  • Replacement parts are same as for standard "GX" clamps
  • Note: The Pad and Cam should be replaced at the same time
  • Clamps 100% Proof Tested, a Certificate of Test supplied with each clamp
  • Order unit is "Each"
    •  
    WARNING!
    • Select proper size clamp for the job.
    • Determine the weight of the plate to be lifted.
    • Do not exceed WLL (Working Load Limit) shown on clamp.
    • Plate thickness must be within grip range shown on clamp.
    GX Structural Short Leg Plate Clamps - Product Details
    Working Load Limit Grip Range Weight Each
    2 Tons 1/16 - 7/8 Inch 15 Lbs.

     

     

     

     

    © Pacific Gulf Wire Rope, Inc. 2010
    Home | Products | Services | Certificate Access | Contact Us | Safety | Affiliates